Signal conditioning for PC based measurement

Supported Data Acquisition Hardware
for Bedo Signal Conditioning Systems

Bedo Signal adapter concept.

The Signal Conditioning System SAE16288 is compatible with nearly every PC data acquisition board and connected to the PC data acquisition board by using the Bedo Signal adapter concept. The adapter is placed in rear of the base unit and uses the same signal connector as the data acquisition board. It is possible to use up to six signal adapters (SAE16288/19) in one system.

PC-Board manufacturer: Bedo Elektronik GmbH

PC-Board

Description

PCS08

I/O-Connector: 37pin Sub-D connector (female) DIN41652
Analog: A-In = 16SE, Digital: D-In = 8Bit / D-Out = 8Bit

PCS11

I/O-Connector: 37pin Sub-D connector (female) DIN41652
Analog: A-In = 32SE

MdmNet10

integrable in the SAE base unit, all signals available

MdmNet20

integrable in the SAE base unit, all signals available

MdmCom20

integrable in the SAE base unit, all signals available

PC-Board manufacturer: Data Translation

PC-Board

Description

DT2812

I/O-Connector: 50pin D-Shell connector
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-In = 8Bit / D-Out = 8Bit / Ext. Trigger / Ext. Clock

DT2817

I/O-Connector: 50pin IDC connector DIN41651 (connector (male))
Digital: D-I/O = 4 x 8Bit

DT2821-Serie

I/O-Connector: 50pin IDC connector DIN41651 (male)
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 8Bit / Ext. Trigger / Ext. Clock

DT2831

I/O-Connector: 50pin D-Shell connector
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 8Bit / 2 x Counter / Ext. Trigger / Ext. Clock

DT300-Serie

I/O-Connector: 68pin High-Density SCSI-III connector (female)
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 8Bit, 1 x 7Bit / 4 x Counter / Ext. Trigger / Ext. Clock

DT3001-Serie

I/O-Connector: 100pin High-Density IDC connector (male)
Analog: A-In = max. 64SE [32DI] / A-Out = 2 SE
Digital: D-I/O = 1 x 8Bit / Counter / Ext. Trigger / Ext. Clock

DT3010

I/O-Connector: 68+50pin High-Density D-Shell connector
Analog: A-In = max. 32SE [16DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 8Bit / D-Out = 2 / 4 x Counter / Analog + TTL Trigger / Ext. Clock

DT3010-268

I/O-Connector: 2 x 68pin High-Density D-Shell connector
Analog: A-In = max. 32SE [16DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 8Bit / D-Out = 2 / 4 x Counter / Analog + TTL Trigger / Ext. Clock

DT980x (USB)

USB-Module integrable in the SAE base unit, all signals available

DT9832 (USB)

USB-Module integrable in the SAE base unit, all signals available

PC-Board manufacturer: Eagle

PC-Board

Description

PC30

I/O-Connector: 50pin Sub-D connector (female) DIN41652
Analog: A-In = 16SE [8DI] / A-Out = 4 SE
Digital: D-I/O = 3 x 8Bit / Ext. Trigger Ext. Clock

PC-Board manufacturer: Goldammmer GmbH

PC-Board

Description

MultiChoice
Light

I/O-Connector: 50pin Sub-D connector (female) DIN41652
Analog: A-In = 16SE [8DI] / A-Out = 4 SE
Digital: D-I/O = 3 x 8Bit / 1 x Counter / Ext. Trigger

MultiChoice
III

I/O-Connector: 50(ana.) + 25(dig.) pin Sub-D connector (female) DIN41652
Analog: A-In = 32SE [16DI] / A-Out = 4 SE
Digital: D-I/O = 3 x 8Bit

MultiChoice
IV

I/O-Connector: 50(ana.) + 50(dig.) pin Sub-D connector (female) DIN41652
Analog: A-In = 32SE [16DI] / A-Out = 8 SE
Digital: D-I/O = 4 x 8Bit / 8 Counter

MultiChoice USB MC4

integrable in the SAE base unit, all signals available

PC-Board manufacturer: IIG Intelligent Instrumentation

PC-Board

Description

PCI20428

I/O-Connector: 50pin IDC connector DIN41651 (male)
Analog: A-In = 16SE [8DI] A-Out= 2SE
Digital: D-In = 8Bit / D-Out = 8Bit / Counter / Ext. Input

PC-Board manufacturer: IOtech

PC-Board

Description

DaqBoard2000

I/O-Connector: 100pin I/O-Connector
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 16Bit HDS + 2 x 8Bit / 4 x Counter

PC-Board manufacturer: Microstar

PC-Board

Description

DAP3200
Serie

I/O-Connector: 68(ana.) D-Shell Buchse + 100(dig).pin HighDensity connector (male)
Analog: A-In = 16SE [8DI] / A-Out = 2SE / Ext. Clock / Ext. Trigger / Expansion
Digital: D-In = 16Bit / D-Out = 16Bit / Counter

PC-Board manufacturer: National Instruments

PC-Board

Description

AT-MIO16

I/O-Connector: 50pin IDC connector DIN41651 (male)
Analog: A-In = 16SE
Digital: D-In = 8Bit / D-Out = 8Bit / 2 x Counter / Ext. Trigger / Ext. Clock

DAQ-Card700

I/O-Connector: 50pin IDC connector DIN41651 (male)
Analog: A-In = 16SE
Digital: D-In = 8Bit / D-Out = 8Bit / 2 x Counter / Ext. Trigger / Ext. Clock

B-Serie

Boards: NI-6013, NI-6014
I/O-Connector: 68pin High-Density SCSI-III connector (male)
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 4Bit, 2 x Timer/Counter

E-Serie

Boards: NI-6070E, NI-6062E, NI-604xE, NI-603xE, NI-602xE, NI-601xE
I/O-Connector: 68pin High-Density SCSI-III connector (male)
Analog: A-In = 16SE [8DI] / A-Out = 2 SE
Digital: D-I/O = 2 x 4Bit, 2 x Timer/Counter

M-Serie

Kartentypen: NI-622x, NI-625x
I/O-Connector: 1 or 2 68pin High-Density SCSI-III connector(s) (male)
Analog: A-In = 16/32 / A-Out = 2/4 SE
Digital: D-I/O = 24/48Bit, 8/32 x Timer/Counter

S-Serie

Boards: NI-611xS
I/O-Connector: 68polige High-Density SCSI-III (male)
Analog: A-In = 4 / A-Out = 2
Digital: D-I/O = 2 x 4Bit, 2 x Timer/Counter

PC-Board manufacturer: UEI United Electronic Industries

PC-Board

Description

PowerDAQ II PCI
(Analog)

I/O-Connector: 96pin D-Shell connector
Analog: A-In = max.32SE [16DI] / A-Out = 2SE
Digital: Trigger

PowerDAQ II PCI
(Digital)

I/O-Connector: 37pin Sub-D connector (female) DIN41652
Digital: 32 I/O Lines; 3 Counter/Timer

Further adapters for other PC-Data acquisition boards on request!